Table of Contents
Advertisement
Chapter 10 Zones
10.2 Zone
The Zone screen provides a summary of all zones. In addition, this screen allows you to add, edit,
and remove zones. To access this screen, click Configuration > Network > Zone.
Figure 66 Configuration > Network > Zone
The following table describes the labels in this screen.
Table 65 Configuration > Network > Zone
LABEL
Add
Edit
Remove
Object Reference
#
Name
Member
136
DESCRIPTION
Click this to create a new, user-configured zone.
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry's settings.
To remove a user-configured zone, select it and click Remove. The NXC confirms you
want to remove it before doing so.
Select an entry and click Object Reference to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with any interface.
This field displays the name of the zone.
This field displays the names of the interfaces that belong to each zone.
NXC2500 User's Guide
Advertisement
Table of Contents
Troubleshooting
