Table of Contents
Advertisement
Chapter 18 Addresses
The Address screen provides a summary of all addresses in the NXC. To access this screen, click
Configuration > Object > Address > Address. Click a column's heading cell to sort the table
entries by that column's criteria. Click the heading cell again to reverse the sort order.
Figure 116 Configuration > Object > Address > Address Summary
The following table describes the labels in this screen.
Table 104 Configuration > Object > Address > Address Summary
LABEL
Add
Edit
Remove
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
#
Name
Type
Address
18.2.1 Add/Edit Address
The Add/Edit Address screen allows you to create a new address or edit an existing one. To
access this screen, go to the Address screen, and click either the Add icon or an Edit icon.
Figure 117 Configuration > Object > Address > Address > Add/Edit
210
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so.
use the entry.
This field is a sequential value, and it is not associated with a specific address.
This field displays the configured name of each address object.
This field displays the type of each address object. "INTERFACE" means the object uses
the settings of one of the NXC's interfaces.
This field displays the IP addresses represented by each address object. If the object's
settings are based on one of the NXC's interfaces, the name of the interface displays first
followed by the object's current address settings.
NXC2500 User's Guide
Advertisement
Table of Contents
Troubleshooting
