ZyXEL Communications NXC2500 User Manual page 289

Table 143 Configuration > System > FTP (continued)
LABEL
Add
Edit
Remove
Move
#
Zone
Address
Action
Apply
Reset
NXC2500 User's Guide
DESCRIPTION
Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so. Note that subsequent entries move up by one when you take this action.
To change an entry's position in the numbered list, select the method and click Move to
display a field to type a number for where you want to put it and press [ENTER] to move
the rule to the number that you typed.
This the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the NXC's (non-configurable) default
policy. The NXC applies this to traffic that does not match any other configured rule. It is
not an editable rule. To apply other behavior, configure a rule that traffic will match so the
NXC will not have to use the default policy.
This is the zone on the NXC the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is allowed or denied
to access.
This displays whether the computer with the IP address specified above can access the NXC
zone(s) configured in the Zone field (Accept) or not (Deny).
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
Chapter 24 System
289