Edit Ap List - ZyXEL Communications NXC2500 User Manual

Chapter 7 Wireless

7.3.1 Edit AP List

Select an AP and click the Edit button in the Configuration > Wireless > AP Management table
to display this screen.
Figure 44 Configuration > Wireless > AP Management > Edit AP List
Each field is described in the following table.
Table 45 Configuration > Wireless > AP Management > Edit AP List
LABEL
Create new Object
MAC
Model
Description
Radio 1/2 OP Mode
92
DESCRIPTION
Use this menu to create a new Radio Profile or MON Profile object to associate with
this AP.
This displays the MAC address of the selected AP.
This field displays the AP's hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the NXC and the information is
unavailable as a result.
Enter a description for this AP. You can use up to 31 characters, spaces and underscores
allowed.
Select the operating mode for radio 1 or radio 2.
AP Mode means the AP can receive connections from wireless clients and pass their
data traffic through to the NXC to be managed (or subsequently passed on to an
upstream gateway for managing).
MON Mode means the AP monitors the broadcast area for other APs, then passes their
information on to the NXC where it can be determined if those APs are friendly or
rogue. If an AP is set to this mode it cannot receive connections from wireless clients.
NXC2500 User's Guide