Configuring Www Service Control - ZyXEL Communications NXC2500 User Manual

Note: If you disable HTTP in the WWW screen, then the NXC blocks all HTTP connection
attempts.

24.7.4 Configuring WWW Service Control

Click Configuration > System > WWW to open the WWW screen. Use this screen to specify
from which zones you can access the NXC using HTTP or HTTPS. You can also specify which IP
addresses the access can come from.
Note: Admin Service Control deals with management access (to the Web Configurator).
User Service Control deals with user access to the NXC.
Figure 155 Configuration > System > WWW > Service Control
NXC2500 User's Guide
Chapter 24 System
273