Edit Ip/Mac Binding - ZyXEL Communications NXC2500 User Manual

13.2.1 Edit IP/MAC Binding

Click Configuration > Network > IP/MAC Binding > Edit to open this screen. Use this screen
to configure an interface's IP to MAC address binding settings.
Figure 77 Configuration > Network > IP/MAC Binding > Edit
The following table describes the labels in this screen.
Table 71 Configuration > Network > IP/MAC Binding > Edit
LABEL
IP/MAC Binding
Settings
Interface
Name
Enable IP/
MAC Binding
Enable Logs
for IP/MAC
Binding
Violation
Static DHCP
Bindings
Add
Edit
Remove
#
NXC2500 User's Guide
DESCRIPTION
This field displays the name of the interface within the NXC and the interface's IP address
and subnet mask.
Select this option to have this interface enforce links between specific IP addresses and
specific MAC addresses. This stops anyone else from manually using a bound IP address on
another device connected to this interface. Use this to make use only the intended users
get to use specific IP addresses.
Select this option to have the NXC generate a log if a device connected to this interface
attempts to use an IP address not assigned by the NXC.
This table lists the bound IP and MAC addresses. The NXC checks this table when it assigns
IP addresses. If the computer's MAC address is in the table, the NXC assigns the
corresponding IP address. You can also access this table from the interface's edit screen.
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so.
This is the index number of the static DHCP entry.
Chapter 13 IP/MAC Binding
151