ZyXEL Communications NXC2500 User Manual page 161

Table 77 Configuration > Captive Portal > Auth. Policy Add/Edit
LABEL
Description
Source Address
Destination
Address
Schedule
Authentication
Force User
Authentication
OK
Cancel
NXC2500 User's Guide
DESCRIPTION
Enter an optional description of the authentication policy. You can enter up to 60
characters.
Select an address object from the list. If none are available, you can create a new one
using the Create New Object button.
The source address is an IP address for which the captive portal intercepts all network
traffic.
Select an address object from the list. If none are available, you can create a new one
using the Create New Object button.
The destination address is an IP address for which the captive portal intercepts all network
traffic toward.
Select a schedule from the list. If none are available, you can create one in Configuration
> Object > Schedule.
Select whether authentication is required or not necessary for this rule.
Select this option to redirect HTTP traffic to the login screen if the user has not logged in
yet.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving.
Chapter 14 Captive Portal
161