Edit Ethernet - ZyXEL Communications NXC2500 User Manual

Each field is described in the following table.
Table 50 Configuration > Network > Interface > Ethernet
LABEL
Edit
Activate
Inactivate
Object Reference
#
Status
Name
IP Address
Mask
PVID
Apply
Reset

8.2.1 Edit Ethernet

This screen lets you configure IP address assignment and interface parameters. To access this
screen, click an Edit icon in the Ethernet screen.
NXC2500 User's Guide
DESCRIPTION
Double-click an entry or select it and click Edit to open a screen where you can modify
the entry's settings.
To turn on an interface, select it and click Activate.
To turn off an interface, select it and click Inactivate.
Select an entry and click Object Reference to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with any interface.
This icon is lit when the entry is active and dimmed when the entry is inactive.
This field displays the name of the interface.
This field displays the current IP address of the interface. If the IP address is 0.0.0.0,
the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address (STATIC) or
dynamically assigned (DHCP). IP addresses are always static in virtual interfaces.
This field displays the interface's subnet mask in dot decimal notation.
This field indicates the interface's PVID.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
Chapter 8 Interfaces
105