ZyXEL Communications NXC2500 User Manual page 34

Chapter 3 The Web Configurator
The fields vary with the type of object. The following table describes labels that can appear in this
screen.
Table 8 Object References
LABEL
Object Name
#
Service
Priority
Name
Description
Refresh
Cancel
Console
The Console allows you to use CLI commands from directly within the Web Configurator rather than
having to use a separate terminal program. In addition to logging in directly to the NXC's CLI, you
can also log into other devices on the network through this Console. It uses SSH to establish a
connection.
Note: To view the functions in the Web Configurator user interface that correspond
directly to specific NXC CLI commands, use the CLI Messages window (see
on page
Figure 11 Console
34
DESCRIPTION
This identifies the object for which the configuration settings that use it are displayed. Click
the object's name to display the object's configuration screen in the main window.
This field is a sequential value, and it is not associated with any entry.
This is the type of setting that references the selected object. Click a service's name to display
the service's configuration screen in the main window.
If it is applicable, this field lists the referencing configuration item's position in its list,
otherwise N/A displays.
This field identifies the configuration item that references the object.
If the referencing configuration item has a description configured, it displays here.
Click this to update the information in this screen.
Click Cancel to close the screen.
37) in tandem with this one.
Section
NXC2500 User's Guide