13.3 IP/MAC Binding Exempt List
Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC
Binding Exempt List screen. Use this screen to configure ranges of IP addresses to which the NXC
does not apply IP/MAC binding.
Figure 79 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 73 Configuration > Network > IP/MAC Binding > Exempt List
LABEL
Add
Edit
Remove
#
Name
Start IP
End IP
Apply
NXC2500 User's Guide
DESCRIPTION
Click this to create a new entry.
Click an entry or select it and click Edit to modify the entry's settings.
To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so.
This is the index number of the IP/MAC binding list entry.
Enter a name to help identify this entry.
Enter the first IP address in a range of IP addresses for which the NXC does not apply IP/
MAC binding.
Enter the last IP address in a range of IP addresses for which the NXC does not apply IP/
MAC binding.
Click Apply to save your changes back to the NXC.
Chapter 13 IP/MAC Binding
153