Table of Contents
Advertisement
• Most-visited Web sites and the number of times each one was visited. This count may not be
accurate in some cases because the NXC counts HTTP GET packets.
• Most-used protocols or service ports and the amount of traffic on each one
• LAN IP with heaviest traffic and how much traffic has been sent to and from each one
You use the Traffic Statistics screen to tell the NXC when to start and when to stop collecting
information for these reports. You cannot schedule data collection; you have to start and stop it
manually in the Traffic Statistics screen.
Figure 25 Monitor > System Status > Traffic Statistics
There is a limit on the number of records shown in the report. See
information. The following table describes the labels in this screen.
Table 24 Monitor > System Status > Traffic Statistics
LABEL
Data Collection
Collect Statistics
Apply
Reset
Statistics
Interface
NXC2500 User's Guide
DESCRIPTION
Select this to have the NXC collect data for the report. If the NXC has already been
collecting data, the collection period displays to the right. The progress is not tracked here
real-time, but you can click the Refresh button to update it.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
Select the interface from which to collect information. You can collect information from
Ethernet or VLAN interfaces.
Chapter 5 Monitor
Table 25 on page 67
for more
65
Advertisement
Table of Contents
Troubleshooting
