Add/Edit Static Dhcp Rule - ZyXEL Communications NXC2500 User Manual

Chapter 13 IP/MAC Binding
Table 71 Configuration > Network > IP/MAC Binding > Edit (continued)
LABEL
IP Address
MAC Address
Description
OK
Cancel

13.2.2 Add/Edit Static DHCP Rule

Click Configuration > Network > IP/MAC Binding > Edit to open this screen. Click the Add or
Edit icon to open the following screen. Use this screen to configure an interface's IP to MAC address
binding settings.
Figure 78 Configuration > Network > IP/MAC Binding > Edit > Add/Edit
The following table describes the labels in this screen.
Table 72 Configuration > Network > IP/MAC Binding > Edit > Add/Edit
LABEL
Interface Name
IP Address
MAC Address
Description
OK
Cancel
152
DESCRIPTION
This is the IP address that the NXC assigns to a device with the entry's MAC address.
This is the MAC address of the device to which the NXC assigns the entry's IP address.
This helps identify the entry.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving.
DESCRIPTION
This field displays the name of the interface within the NXC and the interface's IP address
and subnet mask.
Enter the IP address that the NXC is to assign to a device with the entry's MAC address.
Enter the MAC address of the device to which the NXC assigns the entry's IP address.
Enter up to 64 printable ASCII characters to help identify the entry. For example, you may
want to list the computer's owner.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving.
NXC2500 User's Guide