Table of Contents
Advertisement
Table 192 Wireless Frame Capture Logs
LOG MESSAGE
Capture done!
check_size:%d,
max_file_size:%d\n
Can not initial
monitor mode signal
handler.\n
Table 193 DCS Logs
LOG MESSAGE
dcs init failed!\n
init zylog fail\n
channel changed: %s %d
-> %d\n
dcs is terminated!
Table 194 WLAN Station Info
LOG MESSAGE
STA Association.
Addr:%02x%02x%02x%02x%
02x%02x, AP:%s
STA Disassociation.
Addr:%02x%02x%02x%02x%
02x%02x, AP:%s
STA Roaming.
MAC:%02x:%02x:%02x:%02
x:%02x:%02x, From:%s,
To:%s
STA List Full. STA
List of AP [%s] is
Full
NXC2500 User's Guide
DESCRIPTION
This message displays check_size %d and max_file_size %d when the wireless
frame capture has been completed.
1st %d: total files size of directory.
2nd %d: max files size.
While an AP is in Monitor mode, the handler functions as a daemon; if it fails to
initialize the handler, then this message is returned.
DESCRIPTION
Indicates that the NXC failed to initialize the dcs daemon.
Indicates that the NXC failed to initialize zylog.
DCS has changed the wireless interface %s channel from %d to channel %d.
1st %s: interface name
1st %d: current channel
2nd %d: new channel
DCS was terminated for an unknown reason.
DESCRIPTION
A wireless client is connected to the AP.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP's description.
A wireless client is disconnected from the AP.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP's description.
A wireless client roams from one AP to another.
1st %02x~6th%02x: Station MAC Address.
7th %s: Source WTP's description.
8th %s: Destination WTP's description.
The number of wireless clients connected to the AP has reached the
maximium limit.
1st %s: Managed AP's description.
Appendix A Log Descriptions
385
Advertisement
Table of Contents
Troubleshooting
