ZyXEL Communications NXC2500 User Manual page 52

Chapter 4 Dashboard
Table 15 Dashboard (continued)
LABEL
Interface Status
Summary
Name
Status
Zone
IP Addr/
Netmask
IP Assignment
Action
System Status
System Uptime
Current Date/
Time
DHCP Table
Current Login
User
Number of Login
Users
Boot Status
52
DESCRIPTION
This field displays the name of each interface.
This field displays the current status of each interface. The possible values depend on
what type of interface it is.
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected. This field displays
the port speed and duplex setting (Full or Half).
This field displays the zone to which the interface is currently assigned.
This field displays the current IP address and subnet mask assigned to the interface. If
the IP address is 0.0.0.0, the interface is disabled or did not receive an IP address and
subnet mask via DHCP.
This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Use this field to get or to update the IP address for the interface.
Click Renew to send a new DHCP request to a DHCP server.
This field displays how long the NXC has been running since it last restarted or was
turned on.
This field displays the current date and time in the NXC. The format is yyyy-mm-dd
hh:mm:ss. Click the icon to open the screen where you can configure the NXC's date
and time.
This field displays the number of IP addresses the NXC has assigned via DHCP. Click this
to look at the IP addresses currently assigned to the NXC's DHCP clients and the IP
addresses reserved for specific MAC addresses.
This field displays the user name used to log in to the current session, the amount of
reauthentication time remaining, and the amount of lease time remaining.
This field displays the number of users currently logged in to the NXC. Click the link to
pop-open a list of the users who are currently logged in to the NXC.
This field displays details about the NXC's startup state.
OK - The NXC started up successfully.
Firmware update OK - A firmware update was successful.
Problematic configuration after firmware update - The application of the
configuration failed after a firmware upgrade.
System default configuration - The NXC successfully applied the system default
configuration. This occurs when the NXC starts for the first time or you intentionally
reset the NXC to the system default settings.
Fallback to lastgood configuration - The NXC was unable to apply the startup-
config.conf configuration file and fell back to the lastgood.conf configuration file.
Fallback to system default configuration - The NXC was unable to apply the
lastgood.conf configuration file and fell back to the system default configuration file
(system-default.conf).
Booting in progress - The NXC is still applying the system configuration.
NXC2500 User's Guide