Add/Edit Service Group Rule - ZyXEL Communications NXC2500 User Manual

19.3.1 Add/Edit Service Group Rule

The Add/Edit Service Group Rule screen allows you to create a new service group or edit an
existing one. To access this screen, go to the Service Group screen and click either the Add icon
or an Edit icon.
Figure 123 Configuration > Object > Service > Service Group > Add/Edit
The following table describes the labels in this screen.
Table 111 Configuration > Object > Service > Service Group > Add/Edit
LABEL
Name
Description
Member List
OK
Cancel
NXC2500 User's Guide
DESCRIPTION
Enter the name of the service group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
Enter a description of the service group, if any. You can use up to 60 printable ASCII
characters.
The Member list displays the names of the service and service group objects that have
been added to the service group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
Chapter 19 Services
219