Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 130 Configuration > System > USB Storage
LABEL
Activate USB
storage service
Disk full warning
when remaining
space is less than
Apply
Reset
24.4 Date and Time
For effective scheduling and logging, the NXC system time must be accurate. The NXC's Real Time
Chip (RTC) keeps track of the time and date. There is also a software mechanism to set the time
manually or get the current time and date from an external server.
To change your NXC's time based on your local time zone and date, click Configuration > System
> Date/Time. The screen displays as shown. You can manually set the NXC's time and date or
have the NXC get the date and time from a time server.
Figure 145 Configuration > System > Date/Time
NXC2500 User's Guide
DESCRIPTION
Select this if you want to use the connected USB device(s).
Set a number and select a unit (MB or %) to have the NXC send a warning message
when the remaining USB storage space is less than the value you set here.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
Chapter 24 System
261
Advertisement
Table of Contents
Troubleshooting
