Add/Edit Vlan - ZyXEL Communications NXC2500 User Manual

Chapter 8 Interfaces
Table 55 Configuration > Network > Interface > VLAN (continued)
LABEL
IP Address
VID
Member
Apply
Reset

8.3.2 Add/Edit VLAN

This screen lets you configure IP address assignment, interface bandwidth parameters, DHCP
settings, and connectivity check for each VLAN interface. To access this screen, click the Add icon
at the top of the Add column or click an Edit icon next to a VLAN interface in the VLAN Summary
screen. The following screen appears.
116
DESCRIPTION
This field displays the current IP address of the interface. If the IP address is 0.0.0.0, the
interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address (STATIC) or dynamically
assigned (DHCP). IP addresses are always static in virtual interfaces.
This field displays the VLAN ID number.
This field displays the Ethernet interface(s) that is a member of this VLAN.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
NXC2500 User's Guide