Table of Contents
Advertisement
Each field is described in the following table.
Table 44 Configuration > Wireless > AP Management
LABEL
Edit
Remove
Reboot
#
IP Address
MAC Address
Model
R1 Mode / Profile
R2 Mode / Profile
Mgnt. VLAN ID(AC)
Mgnt. VLAN ID(AP)
Description
NXC2500 User's Guide
DESCRIPTION
Select an AP and click this button to edit its properties.
Select an AP and click this button to remove it from the list.
Note: If in the Configuration > Wireless > Controller screen you set the Registration
Type to Always Accept, then as soon as you remove an AP from this list it
reconnects.
Select an AP and click this button to force it to restart.
This field is a sequential value, and it is not associated with any interface.
This field displays the IP address of the AP.
This field displays the MAC address of the AP.
This field displays the AP's hardware model information. It displays N/A (not
applicable) only when the AP disconnects from the NXC and the information is
unavailable as a result.
This field displays the operating mode (AP or MON) and AP profile name for Radio 1. It
displays n/a for the profile for a radio not using an AP profile.
This field displays the operating mode (AP or MON) and AP profile name for Radio 2. It
displays n/a for the profile for a radio not using an AP profile.
This displays the Access Controller (the NXC) management VLAN ID setting for the AP.
This displays the runtime management VLAN ID setting on the AP. VLAN Conflict
displays if the AP's management VLAN ID does not match the Mgnt. VLAN ID(AC).
This field displays n/a if the NXC cannot get VLAN information from the AP.
This field displays the AP's description, which you can configure by selecting the AP's
entry and clicking the Edit button.
Chapter 7 Wireless
91
Advertisement
Table of Contents
Troubleshooting
