4.8.1 Configure AP to Monitor Mode
1 Configure a monitor profile in CONFIGURATION > Object >
MON Profile. Select the default profile and click Edit to change.
Check the Scan Channel Mode is auto and Country Code is
correct and is the location where you use the AP. Click OK to
save.
2 Configure AP to monitor mode in CONFIGURATION > Wireless >
AP Management. Select the AP which is going to work in
monitor mode and click Edit to change. Check Override
Group Radio Setting and select MON Mode with default radio
1 profile which is set in step 1. Click OK to save.
www.zyxel.com
201/225