ZyXEL Communications NXC2500 User Manual page 39

Table 10 Monitor Menu Screens Summary (continued)
FOLDER OR LINK
Station Info
Rogue AP
Log
3.3.2.3 Configuration Menu
Use the configuration menu screens to configure the NXC's features.
Table 11 Configuration Menu Screens Summary
FOLDER OR LINK
Licensing
Registration
Wireless
Controller
AP Management
MON Mode
Load Balancing
DCS
Network
Interface
Routing
Zone
NAT
ALG
IP/MAC Binding
Captive Portal
Object
NXC2500 User's Guide
TAB FUNCTION
Radio List Display information about the radios of the connected APs.
Display information about the connected stations.
Detected Display information about suspected rogue APs.
Device
View Log List log entries for the NXC.
View AP Log Allow you to query connected APs and view log entries for them.
TAB FUNCTION
Registration Register the device.
Service View the licensed service status and upgrade licensed services.
Configuration Configure how the NXC handles APs that newly connect to the
network.
Mgnt. AP List Edit wireless AP information, remove APs, and reboot them.
Rogue/Friendly AP Configure how the NXC monitors for rogue APs.
List
Configure load balancing for traffic moving to and from wireless
clients.
Configure dynamic wireless channel selection.
Ethernet Manage Ethernet interfaces and virtual Ethernet interfaces.
VLAN Create and manage VLAN interfaces and virtual VLAN interfaces.
Policy Route Create and manage routing policies.
Static Route Create and manage IP static routing information.
Configure zones used to define various policies.
Set up and manage port forwarding rules.
Configure SIP, H.323, and FTP pass-through settings.
Summary Configure IP to MAC address bindings for devices connected to
each supported interface.
Exempt List Configure ranges of IP addresses to which the NXC does not apply
IP/MAC binding.
Captive Portal Assign the captive portal web page to various network services.
Login Page Assign and customize the login page user's see when they hit the
captive portal.
Chapter 3 The Web Configurator
39