Session Monitor - ZyXEL Communications NXC2500 User Manual

The following table displays the maximum number of records shown in the report, the byte count
limit, and the hit count limit.
Table 25 Maximum Values for Reports
LABEL
Maximum Number of Records
Byte Count Limit
Hit Count Limit

5.6 Session Monitor

This screen displays information about active sessions for debugging or statistical analysis. It is not
possible to manage sessions in this screen. The following information is displayed.
• User who started the session
• Protocol or service port used
• Source IP address
• Destination IP address
• Number of bytes received (so far)
• Number of bytes transmitted (so far)
• Duration (so far)
You can look at all the active sessions by user, service, source IP address, or destination IP address.
You can also filter the information by user, protocol / service or service group, source address, and/
or destination address and view it by user.
Click Monitor > System Status > Session Monitor to display the following screen.
Figure 26 Monitor > System Status > Session Monitor
NXC2500 User's Guide
DESCRIPTION
20
64
2 bytes; this is just less than 17 million terabytes.
64
2 hits; this is over 1.8 x 10
Chapter 5 Monitor
19
hits.
67