Table of Contents
Advertisement
Chapter 7 Wireless
this screen to configure dynamic radio channel selection on managed APs. Click Configuration >
Wireless > DCS to access this screen.
Figure 50 Configuration > Wireless > DCS
Each field is described in the following table.
Table 49 Configuration > Wireless > DCS
LABEL
Enable Dynamic
Channel Selection
DCS Time Interval
98
DESCRIPTION
Select this to turn on dynamic channel selection for the APs that the NXC manages.
Enter a number of minutes. This regulates how often the NXC surveys the other APs
within its broadcast radius. If the channel on which it is currently broadcasting suddenly
comes into use by another AP, the NXC will then dynamically select the next available
clean channel or a channel with lower interference.
NXC2500 User's Guide
Advertisement
Table of Contents
Troubleshooting
