Diagnostics Files - ZyXEL Communications NXC2500 User Manual

Chapter 27 Diagnostics
The following table describes the labels in this screen.
Table 159 Maintenance > Diagnostics
LABEL
Filename
Last modified
Size
Copy the
diagnostic file
to USB storage
(if ready)
Apply
Collect Now
Download

27.2.1 Diagnostics Files

Click Maintenance > Diagnostics > Files to open the diagnostic files screen. This screen lists the
files of diagnostic information the NXC has collected and stored in a connected USB storage device.
You may need to send these files to customer support for troubleshooting.
Figure 187 Maintenance > Diagnostics > Files
The following table describes the labels in this screen.
Table 160 Maintenance > Diagnostics > Files
LABEL
Remove
Download
#
File Name
Size
Last Modified
326
DESCRIPTION
This is the name of the most recently created diagnostic file.
This is the date and time that the last diagnostic file was created. The format is yyyy-mm-dd
hh:mm:ss.
This is the size of the most recently created diagnostic file.
Select this to have the NXC create an extra copy of the diagnostic file to a connected USB
storage device.
Click Apply to save your changes.
Click this to have the NXC create a new diagnostic file.
Click this to save the most recent diagnostic file to a computer.
DESCRIPTION
Select files and click Remove to delete them from the NXC. Use the [Shift] and/or [Ctrl] key
to select multiple files. A pop-up window asks you to confirm that you want to delete.
Click a file to select it and click Download to save it to your computer.
This column displays the number for each file entry. The total number of files that you can
save depends on the file sizes and the available storage space.
This column displays the label that identifies the file.
This column displays the size (in bytes) of a file.
This column displays the date and time that the individual files were saved.
NXC2500 User's Guide