Hardware Installation And Connection; Rack-Mounted Installation; Rack-Mounted Installation Procedure - ZyXEL Communications NXC2500 User Manual

Hardware Installation and Connection

2.1 Rack-mounted Installation

Note: ZyXEL provides a sliding rail accessory for your use with your device. Please
contact your local vendor for details.
The NXC can be mounted on an EIA standard size, 19-inch rack or in a wiring closet with other
equipment. Follow the steps below to mount your NXC on a standard EIA rack using a rack-
mounting kit. Make sure the rack will safely support the combined weight of all the equipment it
contains and that the position of the NXC does not make the rack unstable or top-heavy. Take all
necessary precautions to anchor the rack securely before installing the unit.
Note: Leave 10 cm of clearance at the sides and 20 cm in the rear.
Use a #2 Phillips screwdriver to install the screws.
Note: Failure to use the proper screws may damage the unit.

2.1.1 Rack-Mounted Installation Procedure

Align one bracket with the holes on one side of the NXC and secure it with the included bracket
1
screws (smaller than the rack-mounting screws).
NXC2500 User's Guide
C
H A PT ER
2
23