Table of Contents
Advertisement
Figure 132 Configuration > Object > AAA Server > LDAP > Add/Edit
The following table describes the labels in these screens.
Table 117 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add/Edit
LABEL
Name
Description
Server Address
Port
Base DN
Use SSL
Search time limit
NXC2500 User's Guide
DESCRIPTION
Enter a descriptive name (up to 63 alphanumerical characters) for identification purposes.
Enter the description of each server, if any. You can use up to 60 printable ASCII
characters.
Enter the address of the AD or LDAP server.
Specify the port number on the AD or LDAP server to which the NXC sends authentication
requests. Enter a number between 1 and 65535.
This port number should be the same on all AD or LDAP server(s) in this group.
Specify the directory (up to 127 alphanumerical characters). For example,
.
c=US
Select Use SSL to establish a secure connection to the AD or LDAP server(s).
Specify the timeout period (between 1 and 300 seconds) before the NXC disconnects from
the AD server. In this case, user authentication fails.
Search timeout occurs when either the user information is not in the AD or LDAP server or
the AD or LDAP server is down.
Chapter 21 AAA Server
o=ZyXEL,
233
Advertisement
Table of Contents
Troubleshooting
