ZyXEL Communications NXC2500 User Manual page 237

Table 119 Configuration > Object > AAA Server > RADIUS > Add/Edit (continued)
LABEL
NAS IP Address
Case-sensitive
User Names
Key
Group
Membership
Attribute
OK
Cancel
NXC2500 User's Guide
DESCRIPTION
If the RADIUS server requires the NXC to provide the Network Access Server IP address
attribute with a specific value, enter it here.
Select this if the server checks the case of the usernames.
Enter a password (up to 15 alphanumeric characters) as the key to be shared between
the external RADIUS server and the NXC.
The key is not sent over the network. This key must be the same on the external RADIUS
server and the NXC.
A RADIUS server defines attributes for its accounts. Select the name and number of the
attribute that the NXC is to check to determine to which group a user belongs. If it does
not display, select User Defined and specify the attribute's number.
This attribute's value is called a group identifier; it determines to which group a user
belongs. You can add ext-group-user user objects to identify groups based on these
group identifier values.
For example you could have an attribute named "memberOf" with values like "sales",
"RD", and "management". Then you could also create a ext-group-user user object for
each group. One with "sales" as the group identifier, another for "RD" and a third for
"management".
Click OK to save the changes.
Click Cancel to discard the changes.
Chapter 21 AAA Server
237