Add/Edit Dynamic Guest Group - ZyXEL Communications NXC2500 User Manual

Table 87 User/Group > Setting > Edit User Authentication Timeout Settings (continued)
LABEL
Reauthentication
Time
OK
Cancel

15.4.2 Add/Edit Dynamic Guest Group

This screen allows you to create a dynamic guest group or edit an existing one. To access this
screen, go to the Configuration > Object > User/Group > Setting screen, and click either the
Add icon or an Edit icon in the Dynamic Guest Group section.
Figure 98 User/Group > Setting > Add/Edit Dynamic Guest Group
The following table describes the labels in this screen.
Table 88 User/Group > Setting > Add/Edit Dynamic Guest Group
LABEL
Name
Description
OK
Cancel
NXC2500 User's Guide
DESCRIPTION
Type the number of minutes this type of user account can be logged into the NXC in one
session before the user has to log in again. You can specify 1 to 1440 minutes. You can
enter 0 to make the number of minutes unlimited. Unlike Lease Time, the user has no
opportunity to renew the session without logging out.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Specify the name used to identify the dynamic guest group.
Enter a description for the dynamic guest group.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
Chapter 15 User/Group
181