Table of Contents
Advertisement
Chapter 21 AAA Server
21.3.1 Add/Edit RADIUS
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen. Click the
Add icon or an Edit icon to display the following screen. Use this screen to create a new entry or
edit an existing one.
Figure 134 Configuration > Object > AAA Server > RADIUS > Add/Edit
The following table describes the labels in this screen.
Table 119 Configuration > Object > AAA Server > RADIUS > Add/Edit
LABEL
Name
Description
Server Address
Authentication
Port
Backup Server
Address
Backup
Authentication
Port
Timeout
236
DESCRIPTION
Enter a descriptive name (up to 63 alphanumerical characters) for identification
purposes.
Enter the description of each server, if any. You can use up to 60 printable ASCII
characters.
Enter the address of the RADIUS authentication server.
Specify the port number on the RADIUS server to which the NXC sends authentication
requests. Enter a number between 1 and 65535.
If the RADIUS server has a backup authentication server, enter its address here.
Specify the port number on the RADIUS server to which the NXC sends authentication
requests. Enter a number between 1 and 65535.
Specify the timeout period (between 1 and 300 seconds) before the NXC disconnects
from the RADIUS server. In this case, user authentication fails.
Search timeout occurs when either the user information is not in the RADIUS server or
the RADIUS server is down.
NXC2500 User's Guide
Advertisement
Table of Contents
Troubleshooting
