Table of Contents
Advertisement
Chapter 26 File Manager
The firmware update can take up to five minutes. Do not turn off or reset
the NXC while the firmware update is in progress!
Figure 181 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
Table 157 Maintenance > File Manager > Firmware Package
LABEL
Boot Module
Current Version This is the firmware version and the date created.
Released Date
File Path
Browse...
Upload
After you see the Firmware Upload in Process screen, wait two minutes before logging into the
NXC again.
Figure 182 Firmware Upload In Process
Note: The NXC automatically reboots after a successful upload.
The NXC automatically restarts causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 183 Network Temporarily Disconnected
After five minutes, log in again and check your new firmware version in the Dashboard screen.
320
DESCRIPTION
This is the version of the boot module that is currently on the NXC.
This is the date that the version of the firmware was created.
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
NXC2500 User's Guide
Advertisement
Table of Contents
Troubleshooting
