Table of Contents
Advertisement
After attaching both mounting brackets, position the NXC in the rack by lining up the holes in the
3
brackets with the appropriate holes on the rack. Secure the NXC to the rack with the rack-mounting
screws.
2.2 Front Panel
This section gives you an overview of the front panel.
Figure 4 NXC Front Panel
1000Base-T Ports
The 1000Base-T auto-negotiating, auto-crossover Ethernet ports support 100/1000 Mbps Gigabit
Ethernet so the speed can be 100 Mbps or 1000 Mbps. The duplex mode can be both half or full
duplex at 100 Mbps and full duplex only at 1000 Mbps. An auto-negotiating port can detect and
NXC2500 User's Guide
Chapter 2 Hardware Installation and Connection
25
Advertisement
Table of Contents
Troubleshooting
