If the upload was not successful, the following message appears in the screen.
Figure 184 Firmware Upload Error
26.4 Shell Script
Use shell script files to have the NXC use commands that you specify. Use a text editor to create the
shell script files. They must use a ".zysh" filename extension.
Click Maintenance > File Manager > Shell Script to open this screen. Use the Shell Script
screen to store, name, download, upload and run shell script files. You can store multiple shell
script files on the NXC at the same time.
Note: You should include write commands in your scripts. If you do not use the write
command, the changes will be lost when the NXC restarts. You could use multiple
write commands in a long script.
Figure 185 Maintenance > File Manager > Shell Script
NXC2500 User's Guide
Chapter 26 File Manager
321