Table of Contents
Advertisement
Chapter 15 User/Group
15.3.1 Add/Edit Group
This screen allows you to add a new user group or edit an existing one. To access this screen, go to
the Group screen, and click either the Add icon or an Edit icon.
Figure 95 Configuration > User/Group > Group > Add/Edit Group
The following table describes the labels in this screen.
Table 85 Configuration > User/Group > Group > Add/Edit Group
LABEL
Name
Description
Member List
OK
Cancel
15.4 Setting
This screen controls default settings, login settings, lockout settings, and other user settings for the
NXC. You can also use this screen to specify when users must log in to the NXC before it routes
traffic for them.
To access this screen, login to the Web Configurator, and click Configuration > Object > User/
Group > Setting.
176
DESCRIPTION
Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores(
), or dashes (-), but the first character cannot be a number. This value is case-
_
sensitive. User group names have to be different than user names.
Enter the description of the user group, if any. You can use up to 60 characters, punctuation
marks, and spaces.
The Member list displays the names of the users and user groups that have been added to the
user group. The order of members is not important. Select users and groups from the
Available list that you want to be members of this group and move them to the Member list.
You can double-click a single entry to move it or use the [Shift] or [Ctrl] key to select multiple
entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the NXC.
Click Cancel to exit this screen without saving your changes.
NXC2500 User's Guide
Advertisement
Table of Contents
Troubleshooting
