ZyXEL Communications NXC2500 User Manual page 375

Table 178 NAT Logs (continued)
LOG MESSAGE
Extra signal port of
H.323 ALG has been
modified.
Signal port of H.323
ALG has been modified.
%s SIP ALG has
succeeded.
Extra signal port of
SIP ALG has been
modified.
Signal port of SIP ALG
has been modified.
Register SIP ALG extra
port=%d failed.
Register SIP ALG
signal port=%d failed.
Register H.323 ALG
extra port=%d failed.
Register H.323 ALG
signal port=%d failed.
Register FTP ALG extra
port=%d failed.
Register FTP ALG
signal port=%d failed.
Table 179 Certificate Path Verification Failure Reason Codes
CODE DESCRIPTION
Algorithm mismatch between the certificate and the search constraints.
1
Key usage mismatch between the certificate and the search constraints.
2
Certificate was not valid in the time interval.
3
(Not used)
4
Certificate is not valid.
5
Certificate signature was not verified correctly.
6
Certificate was revoked by a CRL.
7
Certificate was not added to the cache.
8
Certificate decoding failed.
9
Certificate was not found (anywhere).
10
Certificate chain looped (did not find trusted root).
11
Certificate contains critical extension that was not handled.
12
Certificate issuer was not valid (CA specific information missing).
13
(Not used)
14
NXC2500 User's Guide
DESCRIPTION
Extra H.323 ALG port has been changed.
Default H.323 ALG port has been changed.
The SIP ALG has been turned on or off. %s: Enable or Disable
Extra SIP ALG port has been changed.
Default SIP ALG port has been changed.
SIP ALG apply additional signal port failed.
%d: Port number
SIP ALG apply signal port failed.
%d: Port number
H323 ALG apply additional signal port failed.
%d: Port number
H323 ALG apply signal port failed.
%d: Port number
FTP ALG apply additional signal port failed.
%d: Port number
FTP ALG apply signal port failed.
%d: Port number
Appendix A Log Descriptions
375