Chapter 27 Diagnostics
Table 162 Maintenance > Diagnostics > Packet Capture > Files (continued)
LABEL
File Name
Size
Last Modified
27.3.2 Example of Viewing a Packet Capture File
Here is an example of a packet capture file viewed in the Wireshark packet analyzer. Notice that the
size of frame 15 on the wire is 1514 bytes while the captured size is only 1500 bytes. The NXC
truncated the frame because the capture screen's Number Of Bytes To Capture (Per Packet)
field was set to 1500 bytes.
Figure 190 Packet Capture File Example
27.4 Core Dump
Use the Core Dump screen to have the NXC save a process's core dump to an attached USB
storage device if the process terminates abnormally (crashes). You may need to send this file to
customer support for troubleshooting.
330
DESCRIPTION
This column displays the label that identifies the file. The file name format is interface name-
file suffix.cap.
This column displays the size (in bytes) of a configuration file.
This column displays the date and time that the individual files were saved.
NXC2500 User's Guide