ZyXEL Communications NXC2500 User Manual page 373

Table 176 System Logs (continued)
LOG MESSAGE
Insufficient memory.
Update the profile %s
has failed because of
strange server
response.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update the profile %s
has succeeded.
Collect Diagnostic
Information has failed
- Server did not
respond.
Collect Diagnostic
Infomation has
succeeded.
Port %d is up!!
Port %d is down!!
Table 177 Connectivity Check Logs
LOG MESSAGE
Can't open link_up2
Can not open %s.pid
Can not open %s.arg
The connectivity-
check is activate for
%s interface
The connectivity-
check is fail for %s
interface
Can't get gateway IP
of %s interface
Can't alloc memory
Can't load %s module
Can't handle 'isalive'
function of %s module
NXC2500 User's Guide
DESCRIPTION
Cannot allocate system memory.
Update profile failed because the response was strange, %s is the profile
name.
Update profile succeeded, because the IP address of profile is unchanged, %s
is the profile name.
Update profile succeeded, %s is the profile name.
There was an error and the diagnostics were not completed.
The diagnostics scripts were executed successfully.
The specified port has it's link up.
The specified port has it's link down.
DESCRIPTION
Cannot recover routing status which is link-down.
Cannot open connectivity check process ID file.
%s: interface name
Cannot open configuration file for connectivity check process.
%s: interface name
The link status of interface is still activate after check of connectivity check
process.
%s: interface name
The link status of interface is fail after check of connectivity check process.
%s: interface name
The connectivity check process can't get the gateway IP address for the
specified interface.
%s: interface name
The connectivity check process can't get memory from OS.
The connectivity check process can't load module for check link-status.
%s: the connectivity module, currently only ICMP available.
The connectivity check process can't execute 'isalive' function from module for
check link-status.
%s: the connectivity module, currently only ICMP available.
Appendix A Log Descriptions
373