Dhcp Table - ZyXEL Communications NXC2500 User Manual

4.2.4 DHCP Table

Use this screen to look at the IP addresses currently assigned to DHCP clients and the IP addresses
reserved for specific MAC addresses. To access this screen, click the icon beside DHCP Table in the
dashboard.
Figure 20 Dashboard > DHCP Table
The following table describes the labels in this screen.
Table 19 Dashboard > DHCP Table
LABEL
#
Interface
IP Address
Host Name
MAC Address
Description
Reserve
NXC2500 User's Guide
DESCRIPTION
This field is a sequential value, and it is not associated with a specific entry.
This field identifies the interface that assigned an IP address to a DHCP client.
This field displays the IP address currently assigned to a DHCP client or reserved for a
specific MAC address. Click the column's heading cell to sort the table entries by IP
address. Click the heading cell again to reverse the sort order.
This field displays the name used to identify this device on the network (the computer
name). The NXC learns these from the DHCP client requests. "None" shows here for a
static DHCP entry.
This field displays the MAC address to which the IP address is currently assigned or for
which the IP address is reserved. Click the column's heading cell to sort the table entries
by MAC address. Click the heading cell again to reverse the sort order.
For a static DHCP entry, the host name or the description you configured shows here. This
field is blank for dynamic DHCP entries.
If this field is selected, this entry is a static DHCP entry. The IP address is reserved for the
MAC address.
If this field is clear, this entry is a dynamic DHCP entry. The IP address is assigned to a
DHCP client.
To create a static DHCP entry using an existing dynamic DHCP entry, select this field.
To remove a static DHCP entry, clear this field.
Chapter 4 Dashboard
57