ZyXEL Communications NXC2500 User Manual page 379

Table 183 Force Authentication Logs
LOG MESSAGE
Force User
Authentication will be
enabled due to http
server is enabled.
Force User
Authentication will be
disabled due to http
server is disabled.
Force User
Authentication may not
work properly!
Table 184 File Manager Logs
LOG MESSAGE
ERROR:#%s, %s
WARNING:#%s, %s
ERROR:#%s, %s
WARNING:#%s, %s
Resetting system...
System resetted. Now
apply %s..
Running %s...
NXC2500 User's Guide
DESCRIPTION
Force user authentication will be turned on because HTTP server was turned
on.
Force user authentication will be turned off because HTTP server was turned
off.
DESCRIPTION
Apply configuration failed, this log will be what CLI command is and what error
message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Apply configuration failed, this log will be what CLI command is and what
warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Run script failed, this log will be what wrong CLI command is and what error
message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Run script failed, this log will be what wrong CLI command is and what
warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Before apply configuration file.
After the system reset, it started to apply the configuration file.
%s is configuration file name.
An administrator ran the listed shell script.
%s is script file name.
Appendix A Log Descriptions
379