ZyXEL Communications NXC2500 User Manual page 376

Appendix A Log Descriptions
Table 179 Certificate Path Verification Failure Reason Codes (continued)
CODE DESCRIPTION
CRL is too old.
15
CRL is not valid.
16
CRL signature was not verified correctly.
17
CRL was not found (anywhere).
18
CRL was not added to the cache.
19
CRL decoding failed.
20
CRL is not currently valid, but in the future.
21
CRL contains duplicate serial numbers.
22
Time interval is not continuous.
23
Time information not available.
24
Database method failed due to timeout.
25
Database method failed.
26
Path was not verified.
27
Maximum path length reached.
28
Table 180 Interface Logs
LOG MESSAGE
Interface %s has been
deleted.
Interface %s has been
changed.
Interface %s has been
added.
Interface %s is
enabled.
Interface %s is
disabled.
Interface %s links
down. Default route
will not apply until
interface %s links up.
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u,UpTime=%s
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u
376
DESCRIPTION
An administrator deleted an interface. %s is the interface name.
An administrator changed an interface's configuration. %s: interface name.
An administrator added a new interface. %s: interface name.
An administrator enabled an interface. %s: interface name.
An administrator disabled an interface. %s: interface name.
An administrator set a static gateway in interface but this interface is link
down. At this time the configuration will be saved but route will not take effect
until the link becomes up.1st %s: interface name, 2nd %s: interface name.
Port statistics log. This log will be sent to the VRPT server.
1st %s: physical port name, 2nd %s: physical port status, 1st %u: physical
port Tx packets, 2nd %u: physical port Rx packets, 3rd %u: physical port
packets collisions, 4th %u: physical port Tx Bytes/s, 5th %u: physical port Rx
Bytes/s, 3rd %s: physical port up time.
Interface statistics log. This log will be sent to the VRPT server.
1st %s: interface name, 2nd %s: interface status, 1st %u variable: interface
Tx packets, 2nd %u variable: interface Rx packets, 3rd %u: interface packets
collisions, 4th %u: interface Tx Bytes/s, 5th %u: interface Rx Bytes/s.
NXC2500 User's Guide