System Configuration Using The Relay Function - YASKAWA MP920 User Manual

5 215IF Module

5.1.2 System Configuration Using the Relay Function

5.1.2
ST#1
215IF

System Configuration Using the Relay Function

The following diagram shows an example of a system in which two networks are linked
using 215IF Modules.
When the 215IF Module relay function is used, information can be exchanged with the Con-
trollers connected to a different network segment, and the entire system can be managed and
controlled by the MPE720 Programming Device.
ST#2
215IF
215IF
ST#3
RS-232C
MPE720
Data can be transferred between Network 1 and Network 2 via ST#10 and ST#20. Informa-
tion about all the Controllers can be managed from the MPE720 Programming Device using
the network numbers and station numbers.
ST#10
215IF 215IF
ST#20
215IF
ST#21
5-4
Network 1
(NW#1)
215IF
ST#22
Network 2
(NW#2)