YASKAWA MP920 User Manual page 165

Setting Default Values
The transmission parameters can be set to their default values without entering each parame-
ter, by clicking Edit (E) and then Transmission Parameters Default Settings (D) on the
CP-218 Transmission Definitions menu. The following table shows the default values for
each transmission parameter.
Table 7.5 Default Values for Transmission Parameters
Transmission Parameter
IP Address
Response Time
Count of Retry
Subnet Mask
Gateway IP Address
System Port No. (DIAG. Port No./Engineering
Port)
TCP Zero Window Timer Value
TCP Retry Time
TCP Close Time
IP Assemble Time
MAX. Packet Length
This operation does not return the remote stations' Ethernet addresses or the connection parameters to
INFO
their default settings.
Default Value
192.168.001.001
000.000.000.000
000.000.000.000
10,000
500
1,500
7-19
7.5 CP-218 Transmission Definitions
0
0
3
60
30
7