Part Names; 217If Module - YASKAWA MP920 User Manual

6 217IF Module

6.2.1 217IF Module

6.2

Part Names

6.2.1
This section explains the LED indicators and switch settings for the 217IF Module.
217IF Module
RS-232C
Port 1
CN1
RS-232C
Port 2
CN2
RS-485
Port
CN3
LED Indicators
While the Module is operating normally, the RUN LED indicator will be lit and the ERR
LED indicator will not be lit. If a failure occurs, the RUN LED indicator will turn OFF and
the ERR LED indicator will light or flash. The TX1 LED, TX2 LED, and TX3 LED indica-
tors will light when sending/receiving data.
Indicator
Name
RUN
RUN
ERR
ERR
TX1
TX1
TX2
TX2
TX3
TX3
LED indicators
Name Color
Run Green
Error Red
CN1TX/RX Green
CN2TX/RX Green
CN3TX/RX Green
6-4
Status when Lit
Operating normally
Failure occurred (See next page.)
CP-217 CN1 sending/receiving data
CP-217 CN2 sending/receiving data
CP-217 CN3 sending/receiving data