HW1486011
1
Outline
1.1
1
Outline
1.1
System Configuration
This instruction explains the necessary setting methods for using
EtherNet/IP boards (AB3607 made by HMS) in the DX200 and the
relevant information.
These boards enable the DX200 to communicate general I/O data with
other EtherNet/IP devices.
The AB3607 is used as a master. Settings of the communi-
cation between the DX200 and this board are executed in
NOTE
the maintenance mode.
The network as EtherNet/IP is set with either the mainte-
nance mode or the setting tool made by HMS.
System Configuration
System Configuration Example: AB3607
HW1486011
1-1
DX200
11/61