7.2
Part Names
This section explains the LED indicators and switch settings for the 218IFA Module.
7.2.1
218IF Module
DIP switch
LED Indicators
When the Module is operating normally, the RUN LED indicator will be lit and the ERR
LED indicator will not be lit. If a failure occurs, the RUN LED indicator will turn OFF and
the ERR LED indicator will light or flashes. The TX LED indicator and RX LED indicator
will light when sending/receiving data.
RUN
ERR
TX
RX
COL
10 Base-T
Label
Name
RUN
Run
ERR
Error
TX
218TX
RX
218RX
COL
Collision
7-5
LED indicators
Color
Status when Lit
Green
Operating normally
Red
Failure occurred (See next page.)
Green
218IF sending data
Green
218IF receiving data
Green
218IF detecting collision
7.2 Part Names
7