Cables; 218If Connection Cables - YASKAWA MP920 User Manual

7.4

Cables

This section explains the cable specifications for communications using the 218IFA Module.
7.4.1

218IF Connection Cables

218IF Connector Pin Layout (CN1/AUI)
The 218IFA Ethernet port is a 10Base-T communications port.
The connector for this port is RJ-45 (Modular Jack).
The following table shows the pins, layout, and signal names of the 218IFA Ethernet con-
nectors.
No.
Table 7.3 218IFA 10Base-T Connector (CN1)
Signal Name Remarks
1
TXD+ Send data (+)
2 TXD- Send data (-)
3 RXD+ Receive Data (+)
4 N.C. Not connected
7-11
No. Signal Name Remarks
5
N.C. Not connected
6 RXD- Receive Data (-)
7 N.C. Not connected
8 N.C. Not connected

7.4 Cables

7