YASKAWA MP920 User Manual page 205

* 2. Because the default is 0, change the setting to a value other than 0
(such as 01) when connecting the 217IF Module.
System Settings and Registration Flow
START
Write the settings in the PC Setup (DM 0920 to DM 0923),
using the PV Change operation (see table on previous page).
Use the Force Set operation to set AR 1415.
Write the PC Setup code 0100 for AR 14CH using the PV
Change oparation.
Write the PC Setup code 0200 for AR14CH using the PV
Change operation.
Use the Force Set operation to set AR 1415.
END
8-15
8.2 Connection to a SYSMAC PLC
8