Opening The Cp-215 Transmission Definitions Window - YASKAWA MP920 User Manual

5 215IF Module

5.5.2 Opening the CP-215 Transmission Definitions Window

5.5.2
INFO
ST#1
215
MP920
IF
RIO 215IF
Note: 1. The network is composed of two segments: Network #1 and Net-
work #2.
2. Station 4 (ST#4) uses the CP-215's Message Relay Function to
exchange data between Network #1 and Network #2.
3. A 215PC/AT Card is required in the desktop computer.
Fig. 5.2 CP-215 Network Configuration Example

Opening the CP-215 Transmission Definitions Window

When the CP-215 Transmission Definitions Window is opened in Online Mode, the CP-215
parameters stored in the Machine Controller will be opened. When the Window is opened in
Offline Mode, the MPE720 parameters stored in the hard disk on the MPE720 will be
opened.
Open the CP-215 Transmission Definitions Window from the Module Definitions Window.
When the CP-215 Transmission Definitions Window is opened and the CP-215 parameters are being
set for the first time, a confirmation message box will be displayed indicating that a new file will be
created. Click the OK button to proceed to the next operation.
ST#2
CP- 215
IF
NW#1
ST#4
5-18
ST#3
Desktop
MPE720
computer
215 215 (A Message Relay
IF IF Function is used.)
NW#2
215
MP920
IF
215/AT