Connection To A Display Device; System Configuration - YASKAWA MP920 User Manual

8.1 Connection to a Display Device

8.1

Connection to a Display Device

This section explains communications between a Display Device and a MEMOBUS Slave.
8.1.1

System Configuration

The commercially available GP-450 Display Device is connected to the RS-485 port of the
217IF Module to monitor the status of the MP920.
At the same time, the MPE720 Programming Device is connected to the RS-232C port of
the 217IF Module to manage the engineering environment.
MP920
PS-01 CPU-01 217IF
Engineering
MPE720
RS-232C
GP-450
MEMOBUS
RS-485
Display Device
8
8-3