Cp-215 Repeater-Tc - YASKAWA MP920 User Manual

5 215IF Module

5.7.5 CP-215 Repeater-TC

5.7.5
Repeater-to-Repeater Connector (CN3/B-LINE)
Item
Transmission Speed
Transmission Distance
Twisted-pair Cable
Applicable Connector
Transmission Level
Reception Level
* 1. Refer to System Configuration with Maximum Number of Repeaters
under 5.7.2 System Configuration for the specifications for the maxi-
mum number of Repeaters connected and the total transmission dis-
tance.
* 2. Manufactured by Fujikura Corporation
* 3. Manufactured by Honda Communication Industries Co., Ltd.
Connector Signal Assignments
No.
1 SRD-
2 Not used
3 Not used
4
RT1
* Short-circuiting the RT1 and RT2 terminals connects the internal 75 Ω
terminating resistance.

CP-215 Repeater-TC

The CP-215 Repeater-TC is an electric Repeater that relays CP-215 or CP-216 transmission
signals using coaxial cables.
There are two models of CP-215 Repeater-TC.
• 24-VDC model
• 100/115-VAC, 200-VAC, 100-VDC model
The transmission distance can be extended to a maximum of 100 m.
1 Mbps, 2 Mbps, 4 Mbps (can be set with SW1)
500 m between Repeaters (4 Mbps)
*1
Inside control panel: YS-IPEV-S (CU), 1P × 0.3 mm
Outside control panel: YS-IPEV-S (CU), 1P × 1.25 mm
*3
MR-8LM (G)
68.9 dBm (2.8 Vp)
53.5 dBm (0.475 Vp)
Signal Name No.
*
5-50
Specifications
2
, 75 Ω
Signal Name
5
*
RT2
6 Not used
7 Not used
8 SRD+
*2
2 *2
, 75 Ω