YASKAWA MP920 User Manual page 164

7 218IF Module
7.5.5 Transmission Parameter Settings
Protocol Type
Extended Yaskawa Extended MEMOBUS protocol.
MEMOBUS
MEMOBUS Yaskawa Standard MEMOBUS protocol.
MELSEC Mitsubishi Electric's Ethernet Interface protocol for use with general-
purpose sequencers.
No protocol General-purpose message communications. Data is transmitted and
received without being processed into consecutive MW registers.
11. Code
Handle the code for the data to be transferred at each connection according to the code
set at the remote station.
• RTU: Specifies RTU mode when the MEMOBUS protocol is being used.
• ASCII: Specifies ASCII mode.
• BIN: Specifies binary mode.
The codes that can be selected depend on the data in the Protocol Type column.
Table 7.4 Selectable Codes
Protocol Type
Extended MEMOBUS
Extended MEMOBUS
MEMOBUS
MELSEC
No protocol
Note: Yes: Selectable, No: Not selectable
12. DST. Station (Remote Station's Name)
Enter a connection comment of up to 32characters.
Remarks
RTU
No
No
Yes
No
No
7-18
Code
ASCII BIN
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes