• Memory (Shared memory)
Set the communications buffer address. This is normally set to an unused memory
address in the UMB.
b) Parameter Tab Page
Set the CP-215 transmission parameters. Set the first five parameters: from Own Sta-
tion Address to MEMOBUS Response Watch Time. Leave the other parameters on
their default settings.
i)
ii)
iii)
iv)
v)
i) Own Station Address (Station No.)
Set the MPE720 station number.
UMB
TERMS
UMB: Upper Memory Block.
UMB is one method of expanding DOS memory. Specify the unused area in the area from 640 KB to 1
MB.
4-9
4.2 Communications Port Settings
4